New Electrical Products and Fittings

Our new FA101LP single-gang, low profile IN/OUT Box is designed for new work installations with shallower wall cavities. It's a little shorter than our 'regular' single-gang IN/OUT outlet box - just right for smaller spaces.

IN/OUT Box is adjustable for wall thicknesses up to 1-1/2" - perfect for use when the final wall thickness is unknown; double drywall, change orders; tile, mirrors, etc.

Arlington's new POLE-MOUNT box features an integral mounting bracket. Now you can install a camera, or other electrical accessory anywhere you need to on a rigid pipe 3" to 6" in diameter.

Fast and easy to install, the new 8161PM box attaches to a round metallic or non-metallic pole with hose clamps (not included).

The 8161 Series Boxes offer flexible solutions to mounting security cameras, detectors, electrical accessories or fixtures outdoors.

Roof Topper™ rooftop supports raise conduit or raceway 5-5/8" - or more - off the roof surface to meet the requirements of the 2011 NEC for temperature adjustment for cirular conduit.

Made of 100% recycled material, the heavy-duty base sits on the roof deck without the need to attach the base to the roof surface with mechanical fasteners.

Roof Topper supports stand up to extreme roof conditions protecting and elevating your conduit or raceway above the roof deck.

The easy to install single-gang LV1XL offers the same great features as our popular LV series of mounting brackets, but the screws are extra-long to handle thick walls.

Built-in features like these deliver a better looking job. For use with up to 5/8" double drywall or wall thickness up to 1-1/2". Wall plates mount flush to wall. Mounting wing screws hold bracket securely against wall. Easy to line up or straighten, and mounts veritcal or horizontal.

Arlington's recessed steel combination power and low voltage TV Box™ is the best way to mount flatscreen TVs flush against a wall. Plugs and connectors stay inside the box, without extending past the wall.

Designed for use in commercial construction where metal raceway is used, the steel TV Box™ provides power and/or low voltage in one or more of the openings. Now availabe in 2- and 3-gang styles, in addition to our 4-gang, TVBS613, we have a box for almost any new or old work application!

Arlington's plastic recessed combination power and low voltage TV Box™ offers the secure, easy way to mount flatscreen TVs flush against a wall.

Designed for use in new or old work, our TVB712 and TVB713 boxes have angled outlet boxes that take convenience to a new level. The TVB713 has power and low voltage openings for video, audio, and other datacom connections. It also includes a separate, interchangeable tray that you can use to hide the digital converter box, supplied by some cable companies, behind the TV.

Arlington's non-metallic One Box™ fixture and device boxes feature built-in flanges and gaskets that form a protective barrier against air infiltration.

Fast, easy, and secure installation in new construction, our vapor boxes mount to either wood or steel joists with screws that ship captive.

Available in round for fixtures, and (1) through (4) gang for devices, plus they include additional gasket material for knockouts.

UL listed.

Arlington's NEW 2400 Series - EMT-to-Rigid Combination Couplings - offer a cost-effective solution and the ultimate in jobsite flexibility!

They feature a female thread for use with a variety of listed fittings. For added convenience and versatility, they also have a set-screw for quick, easy attachment to EMT.

Arlington's zinc service entrance cable connectors now come with glands that allow them to handle a range of cable sizes.

This cost-effective design improvement reduces inventory. Five (5) SKUs now handle what twelve (12) used to!

Each connector in the WTC Series includes two or three glands that are listed to handle particular cable sizes. The glands are letter-coded for easy reference to size and application.

Arlington's NEW heavy-duty, super sturdy CE1RP - Cable Entry Bracket - is the fastest way to install a bundle of Class 2 low voltage wiring. Our new entry bracket installs quickly and easily with a 3.5" hole saw, saving both time and money.

Its reinforced slotted cover holds a larger bundle of low voltage cable secure and allows the pass-thorugh of even the largest HDMI connectors.

Arlington's NEW LVK1 - Non-Metallic Low Voltage Mounting Bracket - is perfect for Class 2 wiring installations in existing walls with PVC ENT (electrical non-metallic tubing).

The LVK1 has a knockout for 1/2" or 3/4" tubing and you can use it as its own template to cut the hole. Plus, it adjusts to fit wallboard from 1/4" to 1" thick.

Arlington's NEW 8161CB - Corner Mounting Bracket - is the latest addition to Arlington's 8161 Series for mounting power and low voltage cameras, fixtures, detectors, and more!

Arlington's 8161CB allows you to mount equipment up to 50lbs - inside or out.

Arlington's extra heavy-duty FBRS4200R - plated steel fan/fixture box - now has higher weight ratings.

150lbs for fixtures, 70lbs for fans; for either a fan or fixture on joists spaced 24" on center.

Arlington's new 9" diameter CP9000 - Spring-Mount Ceiling Cover Plate - is the neatest way to cover unused high-hat cans.

With no tools needed, installation couldn't be any faster! CP9000's spring anchor brackets sliip between the turned down metal tabs inside the can or directly to the can.

Arlington's GANGABLE plastic boxes save time and money - you'll save more than 1-1/2 minutes on a four-gang box alone; plus, they cost much less than steel boxes.

Now you can build the box you need - when you need it - just by snapping the ends and center section(s) together.

Now it's easier than ever to get reliable hanging support for fixtures, fixture boxes, cable tray and other static loads requiring drop wire support.

Better than traditional wire-hanging methods, Wire Grabber™ saves time and costs much less than competitve products.

Arlington's RV135 - Single Gang Device Box - is a single-gang shallow depth box with a side volume extension that creates a 13.5 cubic inch capacity box. It provides easy cable installation with 1/4" thick wallboard.

For walls with a minimum of 1-1/2" wall cavity depth. Accomodates a standard device.

The NEW CED130 - Cable Entry Device w/ Slotted Cover - is the newest product in Arlington's SCOOP™ series of entrance plates and hoods.

It provides an aesthetically pleasing installation, while organizing and protecting low voltage cable against abrasion.

Arlington's Non-Metallic, Low Profile and Low Voltage Mounting Brackets, are the time and money-saving solution for faster and easier mounting of Class 2 communications, computer, and cable TV wiring.

Designed to mount wall plates flush, our mounting brackets have features that deliver a better-looking, easy to install job.